Important Information

• Terms of Use and Privacy Policy are available on our website and within the Yehuda App.
• Yehuda detectors are designed to detect white diamonds in the D–K color range. Diamonds with very low clarity (I2 and below) may sometimes produce unreliable results.
• Do not test fancy-colored diamonds.
• Do not test colored gemstones.
• Works with loose or mounted stones, parcels, and melee (any size).
• Loose diamonds may be tested in thin plastic bags, though this is not recommended.
• Not compatible with thick plastic or glass coverings.

New Features

1. Positive CZ Detection

• Patent-Pending Technology: Induces a distinct pink fluorescence in Cubic Zirconia (CZ) and certain simulants (e.g., synthetic white sapphire).
• High Accuracy: Internal testing demonstrates over 99% accuracy.
• Versatile Use: Works with both loose and mounted stones, down to 0.01 ct.
• Flexible Operation: Visual detection works without AI, though AI support is available.

2. AI-Based Stone Classification (Advisory Only)

• Assigns a color coded label to each stone type. (Natural Diamond, HPHT, CVD, CZ, Moissanite)
• Current status: Advisory mode — not for standalone diagnostics yet.
• Accuracy in loose stones: >99% (internal validation), but manual interpretation remains primary.
• Jewelry- not yet functional.
• AI reliability will be certified once target training data (~100,000 labeled samples per stone type loose and mounted) is reached.

Included Accessories

Watson AI

• 1 × Loose stone tray (1.5” × 2.5” / 4 × 6.5 cm)
• 1 × Loose stone tray with dividers (1.5” × 2.5” / 4 × 6.5 cm)
• 1 × Slotted ring holder (up to 8 rings)
• 1 × Smartphone
• 1 × Ethernet to USB-C adapter
• 1 × Short USB-C cable
• 1 × Long USB-C cable

Sherlock AI

• 2 × Loose stone trays (1.5” × 2.5” / 4 × 6.5 cm and 4” × 5” / 10 × 13 cm)
• 2 × Loose stone trays with dividers (1.5” × 2.5” / 4 × 6.5 cm and 4” × 5” / 10 × 13 cm)
• 2 × Magnetic finger ring holders
• 1 × Smartphone
• 1 × Slotted ring holder tray (up to 27 rings)
• 1 × Worldwide power supply (110–240V)
• 1 × Ethernet to USB-C adapter
• 1 × Short USB-C cable
• 1 × Long USB-C cable

Power & Charging

Power On/Off

• Press & hold the rear ON/OFF button for 3 seconds.
• Front LED indicates power status.
• Watson AI powers off automatically after 5 minutes of inactivity when not connected to the charger.
• The phone is not charged by the detector— use any USB-C charger to charge it when needed.
• To shut off, press and hold the power button for 3 seconds. The detector will power down gradually.

Charging (Watson AI)

• Charge overnight using any phone charger via the USB port on the back.
• Can be used while charging.

Warranty

• 1-year warranty under normal use.
• Opening or tampering with the unit voids the warranty.
• Excludes damage from water, impact, misuse, or neglect.
• The smartphone/tablet is not covered.
• Purchasing an extended warranty is available if pursued within 1 month of registration via the Yehuda App.

Setting Up the Yehuda App

After receiving your new detector, follow these steps:

1. Set up your phone and create a Google account.

2. You may use your own account, but we recommend creating a dedicated account for this phone. This account is required to download the App and receive software updates. (No credit card is needed for Google)

3. Open Google Play and search for “Yehuda Detect” or “Sherlock Holmes Detect”.

4. Download and install the Yehuda App.

5. Follow the on-screen instructions to:

• Register your account.
• Add payment information. (Credit Card)
• Add users.
• Turn the detector ON (It takes a few seconds to warm up) and connect your phone using the supplied Ethernet connector and the short or long USB cable.
• Wait for the detector to connect with the phone and press “Continue”.
• You may now begin using your Yehuda detector.

User Types and Permissions

1. Admin

• Creates and manages the account.
• Manages payments and payment information (exclusive to Admins).
• Can invite Admins, Managers, and Users.
• Has full access to all app functions, including cloud settings.

2. Manager

• Can invite Managers or Users.
• Can view business data, but cannot view payment information.

3. User

• Can run tests, view saved tests, and export results.

Note: All user types can perform tests, view saved results, and export data.

Running a Test

⚠️

Important: Always clean loose diamonds and jewelry before testing. Dirt, dust, and fingerprints can alter or obscure the test results.

Steps:

1. Connect the Ethernet adapter to the detector.

2. Connect the USB-C cable between the adapter and your phone.

3. Power on the detector (press and hold the ON/OFF button for 3 seconds).

4. Open the Yehuda App.

5. Wait for the connection message, then close it.

6. Sherlock AI users only → When using the short USB cable, tap the Rotate Screen icon Rotate Screen icon Rotate Screen Royalty-Free Images … at the top of the screen.
7. Tap the Camera icon.
8. Place stones, then aim, zoom, and focus on them.
9. Tap Run Test.
10. To view the AI result, slide the AI Result toggle ON.

• Note: AI can also be enabled later from the Gallery after the test is saved.

IMPORTANT NOTE: The AI is fully cloud-based and cannot work without an internet connection. A stable connection is required to obtain AI results.

Saving a Test

• Tap Continue twice.
• Fill in the desired fields.
• Tap Save.

Starting a New Test

• Tap the Try Again (🔄) icon and confirm, or
• Tap the Trash (🗑️) icon to delete the current test before starting a new one.

Access Saved Tests

• On your phone (Gallery)
• Online at cloud.yehuda.com with your username and password

Yehuda Back Office Instructions

The Yehuda Back Office is user-friendly and intuitive.

1. Access the Back Office from your computer or phone:
Go to cloud.yehuda.com.
2. Login:
Enter your username and password to log in.
3.Navigation:
Use the tabs on the left-hand side to access the various features and tools.
4.Gallery Features:

• View all your tests.
• Change test names.
• Filter by date, name, user, or box.
• Sort tests by different criteria.

5.Managing Tests:

• Delete individual tests or multiple tests in bulk.
• Download any number of tests directly to your computer.

Training Videos

• Video 1 – Learn how to set up your new Sherlock AI and Watson AI detectors.
• Videos 2–12 – These videos are based on a previous model. They do not demonstrate CZ Detection or AI Classification, but they will help you understand how to operate the detector and interpret the results. The detection rules are the same for both the previous and current models.
• Videos 13–14 – Learn how to identify CZ (Cubic Zirconia) and how to see the AI results.

READING THE RESULT – Basic Guidelines

Test result Images
When testing is complete, six images will be displayed:
1. RESULT – Default test image.
2. LUV – Long-wave UV fluorescence.
3. COLORED – Fluorescence when illuminated by our proprietary lamp.
4. GLOWING – Phosphorescence (glow after the light is shut off).
5. ORIGINAL – Picture of the stones under white light.
6. SIMULANTS – Special pink fluorescence of CZ or other simulants.
IMPORTANT
You should not determine results from the RESULT picture alone.
You must also check the LUV, GLOWING, and SIMULANTS pictures.

Failure to check all will lead to an incorrect identification.

Basic Rules
These are the basic rules to give you a general understanding. You MUST review all detailed rules before making a final determination.

1. Natural Diamond

• If the stone shows blue and only blue in the RESULT picture, it is considered a Natural Diamond.

2. Lab-Grown Diamond

• If the stone glows in the GLOWING picture, it is a Lab-Grown Diamond.
  • This glow (phosphorescence) will appear as red markings in the RESULT picture.

Summary:

• If the stone shows any non-blue colors or any red markings in the RESULT image, it is considered Lab-Grown.

GOLDEN RULE

If a stone has blue fluorescence under the LONG UV picture → it is a Natural Diamond.

✅ You do not need to check any other screens.

Now let’s go over all the pictures in details.

Result Picture

• Displays Combined Results: Shows both colored and glowing outcomes.

Interpretation

• 100% Pure Blue Fluorescence (any shade of blue): Natural Diamond
• Any Non-Blue Fluorescence or Red Marking: Lab-Grown Diamond
• Red Marking even over Blue Fluorescence: Lab-Grown Diamond

Additional Notes

• Phosphorescent Stones: Marked in bright red. (Stones that exhibit glowing are lab-grown diamonds.)
• The red overlay intensity may vary; always confirm in the GLOWING picture.
• Filter Adjustment: Use the red filter sensitivity buttons to adjust overlay visibility.
• Best Practice: Always review results across all sensitivity levels, starting from the lowest number (most sensitive), to avoid missing faint phosphorescence.

LUV (Long UV) Picture

• Most Reliable Test Result

Interpretation

• Only Blue Fluorescence: 100% Natural Diamond → (all other test results can be ignored)
• No Reaction or Any Other Color Fluorescence: Disregard the LUV result in the final judgment

Glowing Picture

• Displays phosphorescence after the light source is shut off.

Interpretation

• HPHT Lab-Grown Diamonds: Very strong glow.
• CVD Lab-Grown Diamonds: Some glow or no glow.
• Any Glow (without blue Long UV): Lab-Grown Diamond.
• Simulants: Typically show no glow at all.

COLORED PICTURE

• Displays fluorescence under Yehuda’s proprietary illumination.
• Different stones fluoresce in different colors.

ORIGINAL PICTURE

• Unaltered image under white light.

SIMULANTS PICTURE

• Highlights pink fluorescence suggesting CZ and some other simulants.
• CZ Detection Criteria (All Must Apply):
  1. Strong pink fluorescence in the SIMULANTS image.
  2. No fluorescence in LONG UV.
  3. No phosphorescence in GLOWING.
  4. No fluorescence or only light-to-medium blue hue in COLORED/RESULT.
• Exclusion Criteria:
  EVEN IF A STONE SHOWS PINK FLUORESCENCE IN THE “SIMULANT” PICTURE – IT IS NOT A SIMULANT IF:
  1. Any fluorescence is present in LONG UV.
  2. Any glow is present in GLOWING.
  3. Non-blue fluorescence appears in COLORED.
  4. Performance: >99% detection accuracy (internal validation).

Moissanite Detection

• No fluorescence under COLORED light.
• No glow in GLOWING.
• Under LONG UV: Appears black/opaque.
• AI detects >99% of loose Moissanites accurately. (Internal validation).

Here is a table that summarizes all of the options.

Golden rule: Never rely on RESULT alone—always check LUV, GLOWING, and SIMULANTS before deciding.

EXAPMPLES

FLASHLIGHT EFFECT
Natural diamonds, CZ, and Moissanites do not exhibit phosphorescence, except in rare cases.
However, sometimes a stone that does not have phosphorescence may still show a red overlay in the RESULT picture because a nearby strongly phosphorescent stone is illuminating it.
Example:
The Center stone is an HPHT lab grown diamond that has very strong GLOWING. It is so strong that it behaves like a flashlight making surrounding stones appear as if they are glowing.

After removing the HPHT stone- the diamonds do not show any GLOWING or red marking any more.

Natural diamonds result screens:
ALL DIAMONDS ARE NATURAL!

• COLORED Picture: Natural diamonds will always appear blue.
• RESULT Picture: Natural diamonds will always appear blue. Some stones may also show red markings due to glowing in the GLOWING picture. However, in the LONG UV (LUV) Picture All 3 loose stone and the EC ring show blue fluorescence, confirming they are 100% natural.
• SIMULANT Picture: Natural diamonds may sometimes show slight pink. They may show stronger pink but these stones will still exhibit blue fluorescence under LUV, which confirms their natural origin. Usually, any pink is just a reflection.

✅ Key Rule: Blue fluorescence in the LUV test always indicates a 100% natural diamond, regardless of other observations.

HPHT lab grown diamonds result screens:
HPHT lab grown diamonds will always shine very strongly in the “COLORED” and the “GLOWING” pictures. They will be painted with full red in the “RESULT” picture.
HPHT will not have a reaction in the LUV picture and diamond may have a minor pink color in the “SIMULANT” picture.
It will usually just be just a reflection.

CVD Lab Grown Diamonds

CVD lab grown diamonds result screens:

CVD lab grown diamonds will usually shine with NON-BLUE color the “COLORED” and may or may not have glow in the “GLOWING” pictures. They MAY be painted partially or fully in red in the “result” picture.

REMEMBER: if they are any other color than blue- they are CVD.

If they are blue but painted in some red- they are CVD.

Pay attention to the EC in the center bottom raw. It is blue with slight GLOWING thus painted in some red – That is enough to call it a CVD.

CVD are either NON blue or red painted or both.

CVD will usually not have a reaction in the LUV picture. In rare cases it may show a NON blue fluorescent color.

CVD Diamonds: May rarely show pink in SIMULANTS, but once a stone is identified as CVD (non-blue color and/or glowing), the SIMULANT result should be ignored.

Is it a CVD or an HPHT LAB GROWN DIAMOND?

HPHT Lab Grown Diamonds

• COLORED: strong blue or turquoise.
• GLOWING: Show very strong phosphorescence.
• RESULT: fully painted red.

CVD Lab Grown Diamonds

• COLORED: Usually non-blue colors.
• GLOWING: None to medium phosphorescence.
• RESULT: Mostly non-blue fluorescence and/or some red overlay.

EXAMPLE:
The top 6 diamonds are HPHT Lab Grown Diamonds:
The bottom 6 diamonds are CVD lab Grown Diamonds

CZ:
CZ and some other simulants may show some blue around the outline of the stone or as a reflection in the “COLORED” picture, and show very strong pink fluorescence in the “SIMULANT” picture.

REMEMBER: If a stone has a NON-BLUE fluorescence in the COLORED picture, or a glow in “GLOWING” picture or any color in “LONG UV” picture, it cannot be classified as a simulant!

Moissanite:

Moissanite will have no reaction in ALL screens.

It may show some reflections, but it will not exhibit fluorescence or phosphorescence,

It does have a unique opaque reaction in the “LONG UV” picture.

AI Functionality – Current Status

The Yehuda AI is currently in its early development stage.
In internal testing with loose diamonds, it has already demonstrated accuracy above 98%. While this is a strong start, our goal is to achieve near-perfect accuracy.

Our experts estimate that after testing approximately 100,000 stones from each category, the Yehuda AI should reach near-perfect performance. This process will take time, and we will keep you informed as progress continues.

At the end of a test—or after saving the test—you can enable the Yehuda AI function by sliding the AI button ON.

Please visit this link and get updated on the AI capabilities progress: AI Model Current Capabilities.

At the end of a test—or after saving the test—you can enable the AI function by sliding the AI button ON.

Please understand that the Yehuda AI model is fed by us. This means that if a natural diamond gives a FALSE POSITIVE result (when judged by our eyes), it will also give a FALSE POSITIVE result from the Yehuda AI model.
Our detector is designed to detect all lab-grown diamonds, but it has a very low false positive rate of about 2.5%. This rate will remain the same under the Yehuda AI model results.

AI Stone Classification Colors

• • Once enabled, the AI will calculate the stone types.
  • When finished, each stone will be painted according to its classification:
    • 🔵 Blue = Natural Diamond
    • 🔴 Red = HPHT
    • 🟢 Green = CVD
    • 🌸 Pink = CZ (Other Simulants)
    • 🟢 Orange = Moissanite
    • ⚫ Black = Refer (AI not certain — requires manual review)

All result screens will be painted. You can tap any screen to enlarge it. It is usually best to review the ORIGINAL screen with Yehuda AI markings, but you may choose any view.

The Yehuda AI results will be saved (if you save the test), so the next time you open it, you will not have to wait for the Yehuda AI to regenerate.

⚠ Important Notes:

• IMPORTANT NOTE: The Yehuda AI is fully cloud-based and cannot work without an internet connection. A stable connection is required to obtain Yehuda AI results. The speed of your connection will affect how long you must wait for results.
• It may be more efficient to save the test, turn on Yehuda AI, continue testing, and later return to review the Yehuda AI results.
• You can also log in to your back office at cloud.yehuda.com from any computer, locate your test, and run the Yehuda AI any time.

If you download a test after the Yehuda AI results have been generated, you will also receive an extra image of the ORIGINAL stone with AI markings applied.

Factors That May Affect Yehuda AI Accuracy (and How to Avoid Them)

• 1. Unclean Stones (Loose or Mounted)
  Dirt, dust, or fingerprints can distort results.
  ✅ Always clean all diamonds and jewelry thoroughly before testing.
• 2. Overlapping Loose Stones
  When loose stones are piled or overlapping, the Yehuda AI may not classify them correctly.
  ✅ Place stones separately, ensuring each one is visible.
• 3. Rings with Side Stones
  Side stones may not face the camera directly, leading to missed detection.
  ✅ Retest the ring from multiple angles to ensure full coverage.
• 4. Strong Reflections
  Occasionally, a stone may reflect light strongly, confusing the Yehuda AI.
  ✅ If you notice reflection, reposition the stone slightly and retest.
• 5. HPHT “Flashlight Effect”
  HPHT lab-grown diamonds with very strong glowing can illuminate nearby stones, making them appear as if they glow.
  ✅ Remove the glowing HPHT stone and retest the surrounding stones separately.
• 6. Sometimes stones may have a light fluorescence when they are positioned on their side – reposition them in the center of the tray.

Current Usage Recommendations

• For now, AI testing is available only with loose stones placed in a divided tray:
  • Watson AI: Up to 12 stones.
  • Sherlock AI: Up to 24 stones.
• Future updates will enable the Yehuda AI testing with regular trays.
  We will notify users when this feature becomes available.

How to Use AI Results

1. Primary Reliance
Always rely on your manual result reading first.

2. AI as a Secondary Check
Use the AI results only as an additional reference, not as the sole determination.

3. Handling Discrepancies

• If the Yehuda AI results differ from your manual interpretation, investigate further.
• Move the stones to another place on the tray and re-test.
• Report these cases to Yehuda Support. Discrepancies provide valuable insight to us and will help improve the Yehuda AI’s accuracy over time.

Mounted Stones
Yehuda AI testing for mounted stones is still in the earliest research stage.
We will announce when mounted stone testing becomes available for Yehuda AI analysis.

Troubleshooting & Support

For any issues, please visit www.yehuda.com and watch the instructional video that matches your concern.
We have created numerous short tutorials, and you will likely find one that addresses the problem you are experiencing.

Customer Support

📱 In-App Support → Open the app, go to “CONTACT US”, describe the issue, and send it. We will reply by email or phone as soon as possible.
✉️ Email: sh@yehuda.com
🌐 Website: www.yehuda.com

📞 Phone & WhatsApp Support

Region / Service -> Contact Number
🇮🇱 Israel -> +972-3-575-1456
🇺🇸 USA – New York -> +1-212-221-5985
📲 USA – WhatsApp Support -> +1-646-771-4493
🏦 USA – Pawnbrokers (Ido) -> +1-702-523-6982
🇮🇳 India -> +91-98205-11479
🇬🇧 United Kingdom -> +44-7837-450560
🇩🇪 Germany -> +49-176-767-24218
🇮🇹 Italy -> +39-342-855-1746
🇹🇷 Turkey -> +90-532-247-0985

Troubleshooting Guide

Problem / Error Message -> Solution

⚡ Detector won’t power on -> Check cable → Hold power button 3 sec

🔌 App not connecting -> Restart phone & detector → Check Ethernet & USB

🔍 Images appear blurry -> Tap screen or use focus slider

🎛️ No red markings appear -> Set Red Filter all the way to the left

🛑 “Device cover tray is not closed” – WATSON AI -> Align top cover with base → Press Retry

🛑 “Device cover tray is not closed” – SHERLOCK AI -> Ensure that the drawer is fully shut → Press Retry

📦 “Failed to connect to box” -> Power ON (3 sec) → Wait for green LED → Press Retry, then Close

Yehuda AI Diamond Detector + – FAQ

Q: What does the detector do?
A: It separates natural diamonds from lab-grown (CVD/HPHT) and simulants (CZ, Moissanite).

Q: Which stones can I test?
A: White diamonds (D–K color), CZ, and Moissanites, whether loose or mounted. Not suitable for fancy-color or very low-clarity stones, colored gemstones, or any other gemstones not specifically mentioned here.

Q: How do I know the result?

• Natural Diamond -> Only blue in RESULT. Golden rule: Only blue under LUV (even if RESULT shows more).
• CVD Lab-Grown -> Non-blue fluorescence or glow.
• HPHT Lab-Grown -> Very strong blue-green glow.
• CZ -> Strong pink in Simulants, no glow, no LUV, no non-blue in RESULT.
• Moissanite -> No reaction in RESULT, opaque/black under LUV, no glow in GLOWING.

Q: What if a stone glows?
A: Any glowing stone is lab-grown (never CZ or Moissanite). A natural diamond may glow only if it shows blue under LUV — in that case it is Natural.

Q: How does the Yehuda AI show results?

• Blue = Natural
• Green = CVD
• Red = HPHT
• Pink = CZ
• Yellow = Moissanite
• Black = Refer (needs retest)

Q: How accurate is it?
A: Over 99% in internal testing, and improving with every use.

Q: Can I test stones in jewelry?
A: Yes, rings and jewelry can be tested. Please ensure they are clean.

Q: Can I test parcels or small stones?
A: Yes, the detector works with parcels and melee of any size.

Q: Can I test colored gemstones?
A: No. The detector is not designed to test colored gemstones or fancy-color diamonds.

Q: What is a FALSE POSITIVE result?
A: A False Positive occurs when a natural diamond is mistakenly identified as lab-grown. About 2% of natural diamonds give a false positive result. By comparison, other detectors in the same price range typically have a 5–15% false positive rate.

Q: Can I test lower-color diamonds?
A: Yes, but they will produce a higher rate of false positives. However, if the result indicates Natural Diamond, you can trust it.

Q: Do I need to clean stones first?
A: Yes, dirt or oil can affect results.

Q: Can I test stones inside plastic bags?
A: Thin bags may work, but direct testing is best.

Q: How long does a test take?
A: About 15 seconds.

Q: What if the Yehuda AI shows “Refer”?
A: Retest the stone separately to confirm.

Q: Do I need calibration?
A: No, the detector is self-calibrating.

Q: How do I keep it working properly?
A: Keep the device clean, avoid thick coverings, and update the Yehuda App regularly.

Q: What if I have a technical issue?
A: Use In-App Support: open the app → “Contact Us” → describe the issue and send. We will respond by email or phone as soon as possible.

Glossary

AI (Artificial Intelligence)
Software built into the Yehuda Detector that analyzes test images and provides advisory color-coded classifications of stones.

COLORED Picture
Test image showing stone fluorescence under Yehuda’s proprietary illumination. Used to detect color responses (blue for natural, other colors for lab-grown).

CVD (Chemical Vapor Deposition)
A type of lab-grown diamond produced by depositing carbon atoms in a vacuum chamber. Typically shows non-blue fluorescence.

Fluorescence
Visible light emitted by some stones when exposed to UV illumination.

• Blue fluorescence → Natural diamond.
• Non-blue fluorescence → Usually lab-grown (CVD or HPHT).

Flashlight Effect
When a strongly glowing stone (usually HPHT) casts a red overlay onto nearby stones in the RESULT image, making them appear as if they are glowing.

GLOWING Picture
Displays phosphorescence after the light is shut off. Used to identify lab-grown stones (HPHT → strong glow, CVD → weak/none).

HPHT (High Pressure High Temperature)
A type of lab-grown diamond created by simulating natural formation conditions (extreme heat and pressure). Typically shows strong glowing and turquoise fluorescence.

LUV (Long-Wave UV)
Test image showing fluorescence under long-wave ultraviolet light. Considered the “King Test”:

• Only blue fluorescence → 100% Natural diamond.
• Any non-blue or no fluorescence → Result must be confirmed with other tests.

Moissanite
A diamond simulant with very high brilliance. Does not fluoresce or glow, but appears black/opaque in the LUV image.

Natural Diamond
A diamond formed naturally in the Earth. Detection rule: blue-only fluorescence under LUV = Natural, regardless of other images.

ORIGINAL Picture
A reference image of the stones in normal white light, without filters.

Phosphorescence
Light that continues to glow after the UV light is turned off. Strong in HPHT stones, sometimes present in CVD.

RESULT Picture
The default test image that combines colored and glowing effects. Shows red markings where lab-grown phosphorescence is detected.

Red Filter
Adjustable sensitivity filter used in RESULT images to highlight red markings from phosphorescence. Must be set to the lowest number for correct results.

SIMULANTS Picture
Special filter image that highlights strong pink fluorescence in CZ and other simulants.

Simulants
Stones that look like diamonds but are not real diamonds (e.g., CZ, Moissanite, synthetic white sapphire).

USB-C Cable & Ethernet Adapter
Supplied accessories used to connect the detector to the smartphone for power and data transfer.

Disclaimer

The results provided by Sherlock AI and Watson AI are made available “as is”, without any guarantees or warranties regarding their completeness, accuracy, or reliability.

These systems are provided without warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability, fitness for a particular purpose, and performance.

In no event shall the Company, its affiliates, stockholders, officers, directors, agents, or employees be liable to you or any third party for any decision made or action taken based on the information provided by Sherlock AI or Watson AI. This includes, but is not limited to, any consequential, special, or incidental damages, even if the Company has been advised of the possibility of such damages.